The Blinder R-150 Rear Bike Light is a purpose-built light designed for road cyclists looking for maximum visibility over distance. Featuring 2 unique design elements the effectively aid visibility from afar: a strobe LED and a dedicated angle set LED, both these features have been designed to highlight riders from other roads users, particularly at long distance.
Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility.
| MODE | LUMENS | RUNTIME | 
| High | 35 | 3.5 hrs | 
| Peloton | 2 | 30 hrs | 
| Strobe | 150 | 7.5 hrs | 
| Impact | 110 | 25 hrs | 
| Beacon | 85 | 6.5 hrs | 
| Wave | 90 | 4.5 hrs | 
| Bounce | 100 | 6.5 hrs | 
| Burn | 130 | 2.5 hrs | 
| Eco | 8 | 50 hrs | 

Through its use of advanced COB LED tech & dedicated lighting channels, Blinder R-150 creates visual patterns that are impossible to miss.

There is no requirement for single use batteries or charging cables. Full recharged from flat achieved in 3 hours.

The R-150s exceptional visibility is aided via a dedicated strobe LED set on a deliberate angel of 12° so it's always grabbing maximum attention.

An LED around the button glows green when charging & turns off when charged. This same LED lights up red when your light dips below 10% charge remaining.
| BULB TYPE | Chip On Board (COB) LEDs | 
| LIGHT OUTPUT | 150 lm | 
| LIGHT MODES | 8 | 
| PROGRAMMABLE WITH MODEMAKER | No | 
| AERO SEAT POST COMPATIBLE | Yes | 
| LOW BATTERY INDICATOR | Yes | 
| FITS SET POSTS | 22 – 32mm+ diameter | 
| RUN-TIME | Up to 50 hrs | 
| CHARGE TIME | 4 hrs | 
| RECHARGEABLE | Yes (integrated USB-A connector) | 
| WEIGHT | 40 g / 1.4 oz | 
| DIMENSIONS | H: 51mm x W: 44mm x L: 77mm | 
| WATERPROOF | Yes, IP67 rating | 
| OPERATING TEMP | -20 to 50 °C / -4 to 122 °F | 
| STRAP MATERIAL | Medical grade silicone | 
| OPTIMUM CHARGING TEMP | 20 to 22 °C / 68 to 72 °F (Room Temperature) | 
 
         
       
           
         
                   
                   
                   
                  