The Blinder R-150 Rear Bike Light is a purpose-built light designed for road cyclists looking for maximum visibility over distance. Featuring 2 unique design elements the effectively aid visibility from afar: a strobe LED and a dedicated angle set LED, both these features have been designed to highlight riders from other roads users, particularly at long distance.
Blinder R-150 is designed for cyclists that are looking for serious long-distance visibility.
| MODE | LUMENS | RUNTIME |
| High | 35 | 3.5 hrs |
| Peloton |
2 | 30 hrs |
| Strobe | 150 | 7.5 hrs |
| Impact | 110 | 25 hrs |
| Beacon |
85 | 6.5 hrs |
| Wave |
90 | 4.5 hrs |
| Bounce |
100 | 6.5 hrs |
| Burn |
130 | 2.5 hrs |
| Eco | 8 | 50 hrs |

Through its use of advanced COB LED tech & dedicated lighting channels, Blinder R-150 creates visual patterns that are impossible to miss.

There is no requirement for single use batteries or charging cables. Full recharged from flat achieved in 3 hours.

The R-150s exceptional visibility is aided via a dedicated strobe LED set on a deliberate angel of 12° so it's always grabbing maximum attention.

An LED around the button glows green when charging & turns off when charged. This same LED lights up red when your light dips below 10% charge remaining.
| BULB TYPE | Chip On Board (COB) LEDs |
| LIGHT OUTPUT | 150 lm |
| LIGHT MODES | 8 |
| PROGRAMMABLE WITH MODEMAKER | No |
| AERO SEAT POST COMPATIBLE | Yes |
| LOW BATTERY INDICATOR | Yes |
| FITS SET POSTS | 22 – 32mm+ diameter |
| RUN-TIME | Up to 50 hrs |
| CHARGE TIME | 4 hrs |
| RECHARGEABLE | Yes (integrated USB-A connector) |
| WEIGHT | 40 g / 1.4 oz |
| DIMENSIONS | H: 51mm x W: 44mm x L: 77mm |
| WATERPROOF | Yes, IP67 rating |
| OPERATING TEMP | -20 to 50 °C / -4 to 122 °F |
| STRAP MATERIAL | Medical grade silicone |
|
OPTIMUM CHARGING TEMP |
20 to 22 °C / 68 to 72 °F (Room Temperature) |